Apply UVC LED Disinfectant with Motion and Light Sensor

UVC LED Disinfectant App with Motion and Light Sensor is anintelligent app that revolutionizes ordinary lighting with the added function of disinfection with UVC rays.

Applicable UVC LED Disinfectant is installed in a very simple way, by removing the adhesive from the back of the magnetic strip and mounting the tape in the desired position, and then attaching the applique. 

Aplica UVC has a main lighting LED and two smaller UVC LEDs, positioned at both ends. The way of use is simple and intelligent, thanks to the motion and light sensors, which are activated when you press the power button.

Thus, the LED for lighting will automatically turn on when the ambient light drops below 10 Lux and will automatically turn off after 20 seconds from the moment it no longer detects movement. Afterwards, the UVC LEDs will turn on and disinfect the covered surface for 20 seconds, or they will automatically turn off faster when movement is detected, at which point the LED for lighting will turn on again.

In addition to these integrated functions, you also have the possibility to radjust the light intensity, by long pressing the button on/off switch.

The UVC LED lamp can be installed anywhere you need an extra light source or a thorough disinfection of surfaces or objects (in cupboards, above the work surface in the kitchen, above the desk, etc.).

• Simple and quick installation. The UVC LED lamp is installed in a few simple steps and is ready for use.
• Dual functionality: work lamp and disinfectant lamp, so you can carry out your work in a safe environment.
• Eliminates viruses, harmful microorganisms and unpleasant odors.
• Easy control of all functions, thanks to the touch control panel.
• Motion sensor - when movement is detected, the UV function stops automatically, so as not to endanger people or animals in the room.
• The surface behind the lamp is magnetic. Thus, the lamp can be easily placed anywhere you want. 
• Light sensor - when there is natural light in the room where the lamp is installed, it does not turn on. The UVC Led application starts automatically when the sensor no longer detects the light. 
• The UVC Led lamp has two built-in operating modes, manual and automatic. 
• The Battery is integrated in the lamp, which is charged using a USB cable. The lamp is equipped with light indicators that reflect the battery level. 
• The lamp has the function of adjusting the light intensity and thus you can use it at maximum capacity in the work area (kitchen, office) and you can adjust it to a lower intensity in relaxation areas (bedroom, living room, dressing room, etc.).

• Dimensioni: 30.4 x 3.8 x 2 (cm)
• Power: 3W
• Voltaj: DC5V 1A
• Lifetime: 50,000 hours
• Battery capacity: 1100 mAh
• Material: Aluminum alloy
• Light flux: 200lm
• Color temperature: 4000k
• CRI: 90
• Operating Temperature: between -25 and -60 degrees Celsius
• Protection Class: IP20
• Weight: 450g

CAUTION!The light of the portable UVC lamp must not come into contact with the eyes! After pressing the start button, it will start automatically in 20 seconds so that the rays do not come into contact with the eyes. 

The plants must be removed from the room where the portable UVC lamp is used only during the period in which it is working.

The aquariums must be covered with a black material during the period in which the portable lamp is working.